The medium-sized vibrators that GIPA produces have a hardened piston and cylinder surrounded by an aluminium housing. The exhaust air is used in this housing as a cooling medium (expansion, air cools after compressed air expands). In this way, the already low surface temperature of the running surfaces is further reduced.
*** NOISE ***
All LM vibrators are equipped with an Aluminium SOUND ABSORBING HOUSING and, as a result, are LOW-NOISE
This construction ensures that the tolerances between the running surfaces can be minimal. In this way, the LM series linear vibrators offer a high yield at a very low air consumption and noise level without using special seals. One of the main advantages of these linear or piston vibrators is that both the frequency and the amplitude can be adjusted steplessly independently of each other over practically the entire range. In contrast to rotary vibrators, piston vibrators do not require start-up time and shut-down time and are suitable for pulsating operation.
The exterior of the LK vibrators is given a special surface treatment, making them rustproof and resistant to most cleaning agents.
The vibrators are highly suitable for powering vibration chutes, sieves and vibrating tables, or for mounting on bunkers, silos and funnels for optimum outflow of your bulk materials. Other possible applications include compacting bulk materials in packages, dosing, sorting, separating or (indeed) mixing, orienting, removing air, unblocking and so forth.
For HORIZONTAL use, a starter valve is required.
TECHNICAL INFORMATION LM SERIES (Linear Medium)
|(measurements carried out at 6 bar)|
Mounting plates are also available for the LM series in steel and stainless steel designs.